The garage door opens a foot and then stops. The springs are broken. What can you do?

This Video Should Help:

Why does my garage door only open a foot then stop?

If youufffdve ever pressed your garage door opener only to have the door stop after opening just a few feet, you know how frustrating that can be. There are several reasons this might happen, but thankfully, most of them are easy to fix.

First, check the alignment of the photo eyes. These safety devices are designed to keep the door from closing if something is in the way, and if theyufffdre not aligned properly, the door will stop and then reverse. To check the alignment, look at the photo eyes from outside the garage. If one or both of them is obscured by debris or dirt, clean them off and try again. You might also need to adjust the positioning of the photo eyes themselves; consult your ownerufffds manual for instructions on how to do this.

Another possible reason for a garage door that only opens a foot or so is a damaged or broken spring. These springs are under a lot of tension, and if one breaks, it can cause the door to open only a short distance before stopping abruptly. If you suspect a broken spring might be the culprit, call a professional for assistance; trying to repair or replace these springs yourself can be extremely dangerous.

In some cases, pressing the ufffdcancelufffd button on your garage door opener remote control can cause the door to open only partway and then stop. If this happens, try pressing the ufffd|ufffd button (located next to the cancel button) to cancel any commands that might be in progress. Once you do this, press the button again to see if the door opens all the way. If it does, there was probably just an issue with the signal between your remote and opener; if it doesnufffdt, you may need to reprogram your opener or get a new remote altogether.

If youufffdve checked all of these things and your garage door still wonufffdt open more than a foot or so before stopping abruptly, there could be an issue with your opener itself. Try unplugging it for a few minutes and then plugging it back in; sometimes this will reset things and fix any temporary glitches that might be causing problems. If that doesnufffdt work, you may need to replace your opener entirely.

Is this a common problem?

Most garage doors open and close without issue. However, sometimes a garage door will only open a foot or so, then stop. There are several reasons why this could be happening.

One reason could be that the door is out of alignment. To check if this is the case, open the door manually and see if it gets stuck in the same spot. If it does, then you’ll need to adjust the alignment.

Another reason could be that there is something blocking the door from opening all the way. Check to see if there are any objects in the way of the door (e.g., a piece of furniture, a toy, etc.). If there is something blocking the door, remove it and try opening the door again.

If you’re still having trouble, you can check some of the blogs or forums to see if anyone else has had this problem and what they did to fix it. Or, you can cancel your photo request and submit a new one with more specific information about what’s going on.

What are some possible causes?

If your garage door only opens a foot then stops, there could be several reasons. First, check to see if the path of the garage door is clear. If something is blocking the door, it will only open a foot then stop. Second, check the alignment of the sensors. The sensors are usually located at the bottom of the garage door frame on both sides. If they are misaligned, the door will open a foot then stop. Third, check to see if the garage door opener is plugged into an outlet. If it is not plugged in, the door will only open a foot then stop. Finally, check to see if the photo eye is dirty. The photo eye is located at the bottom of the garage door frame on both sides. If it is dirty, it will not be able to detect when something is in the way and the door will only open a foot then stop.

How can I fix it myself?

If your garage door only opens a foot then stops, it is most likely due to one of these four reasons. You can try to fix the issue yourself or reply to this post for more help.

1. Check the alignment of the photo eyes. These are the sensors that tell the opener when something is in the way and should cause the door to stop and reverse. If they are misaligned, then the door will stop before it is fully open.

2. Something may be blocking the path of the door. Make sure that there is nothing in the way of the sensors or rollers.

3. The opener may be cancelling itself due to a safety feature. Check your ownerufffds manual to see if there is a way to disable this feature.

4. The springs could be damaged or broken. This is a more serious issue that you will need professional help to fix.

Should I call a professional?

If your garage door only opens a foot then stops, there are several possible reasons. Before you call a professional, check the following:

-Is the door obstructed in any way? If so, clear the obstruction and try again.

-Is the door properly aligned? Check the alignment and make adjustments as needed.

-Are the batteries in the remote control fresh? If not, replace them and try again.

If you’ve checked all of these things and the door still won’t open, it’s time to call a professional.

How much will it cost to fix?

To get a ballpark idea of how much it will cost to fix your garage door, you first need to know what are some possible reasons it’s not working. Once you have a general idea, then you can ask for quotes from repair companies.

One possible reason your garage door only opens a foot then stops is that the tracks are out of alignment. You can check this yourself by looking at the alignment of the tracks relative to each other and to the door opener unit. If they look off, then that’s likely the problem. You can try to realign them yourself, but it’s often best to leave this to a professional.

Another possible reason is that there’s something blocking the path of the garage door sensors. These are usually located at the bottom of the door on both sides. If there’s something blocking them (a piece of dirt, a toy, etc.), then the door won’t open. Simply remove whatever is blocking them and see if that fixes the problem.

If you’re still unsure what the problem is or how to fix it, there are plenty of DIY blogs and forums where people ask and answer questions about repairing garage doors. Just do a quick search online and you should be able to find what you’re looking for.

Once you have a general idea of what needs to be done, you can start contacting different repair companies for quotes. Be sure to let them know exactly what the problem is so they can give you an accurate quote. Also, be sure to ask if they have any discounts or promotions that could apply to your repair.

Get at least 3 different quotes before deciding on a company, and make sure you understand exactly what is included in their quote. Once you’ve found a company you’re happy with, schedule an appointment for them to come out and fix your garage door!

How can I prevent this from happening again?

If your garage door only opens a foot then stops, there are several reasons this might be happening. The first thing you should check is the alignment of the door. If the door is not aligned properly, it will not open all the way. You can check the alignment by looking at the photo below. If you see that the door is not aligned properly, you can try to adjust it yourself or hire a professional to do it for you.

Another reason your garage door might only open a foot then stop is because of something blocking the path of the door. If there is something blocking the door, it will not be able to open all the way. You can check for things blocking the door by looking at the photo below. If you see that there is something blocking the door, you can try to remove it yourself or hire a professional to do it for you.

If your garage door still only opens a foot then stops after you have checked the alignment and there are no things blocking the path of the door, then you should reply to this message and I will help you figure out what is causing the problem.

What are some other common garage door problems?

If your garage door only opens a foot then stops, there are several possible reasons. First, check the alignment of the photo eyes. These sensors tell the opener when an object is in the way and prevent the door from closing. If theyufffdre misaligned, the door wonufffdt open.

Next, check the tension on the torsion spring. This spring is what counterbalances the weight of the door and helps it to open and close smoothly. If itufffds too tight, the door will open a foot then stop. The torsion spring should be turned clockwise to tighten it.

If neither of these solutions solves the problem, there may be an issue with the garage door opener itself. Check to see if there are any error codes displayed on the opener and reply for further instructions.

How can I maintain my garage door to prevent issues?

Your garage door is one of the most used pieces of equipment in your home, and itufffds important to keep it in good working order. Here are some tips on how to maintain your garage door to prevent common issues:

1. Check the alignment of the door regularly. The tracks should be aligned evenly, and the rollers should be in good condition. If you see any damage, replace the damaged parts.

2. lubricate the door regularly. You can use a special garage door lubricant, or a generalpurpose lubricant such as WD-40.

3. Inspect the photo-eye sensor monthly. This sensor prevents the door from closing if there is something in its path, so itufffds important that it is working properly. Clean the lenses with a soft cloth if they are dirty.

4. Test the emergency release cord monthly. This cord allows you to open the door manually if there is a power outage or other issue. To test it, pull on the cord while holding down the button on the opener unit. The door should open and close smoothly.

Troubleshooting tips for when your garage door stops working

If your garage door is only opening a foot then stopping, there are a few things you can check before calling a professional. First, check the alignment of the photo eyes. These sensors prevent the door from closing if something is in the way, so if they’re misaligned, the door will stop and reverse when it hits an object. You can usually adjust the sensors yourself by following the instructions in your owner’s manual or checking online tutorials or blogs. If that doesn’t work, make sure there’s nothing blocking the door itself, like a fallen branch or debris. If you still can’t get the door to open all the way, it’s time to call a garage door repair technician to take a look and see what else could be causing the problem.

About the Author

Simon Jameson

Simon Jameson is an expert reviewer at mydoorstops.com and has been with us since 2017. Trust his reviews as he is also a regular user of all products that he reviews.

View All Articles